diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index 99d88a8..8809302 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -49,6 +49,7 @@
 COBJS-$(CONFIG_MPC8572) += ddr-gen3.o
 COBJS-$(CONFIG_MPC8536) += ddr-gen3.o
 COBJS-$(CONFIG_P2020)	+= ddr-gen3.o
+COBJS-$(CONFIG_MPC8569)	+= ddr-gen3.o
 
 COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
 COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o tlb.o \
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 5b72fe5..ef976a4 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -61,6 +61,8 @@
 	CPU_TYPE_ENTRY(8567, 8567_E),
 	CPU_TYPE_ENTRY(8568, 8568),
 	CPU_TYPE_ENTRY(8568, 8568_E),
+	CPU_TYPE_ENTRY(8569, 8569),
+	CPU_TYPE_ENTRY(8569, 8569_E),
 	CPU_TYPE_ENTRY(8572, 8572),
 	CPU_TYPE_ENTRY(8572, 8572_E),
 	CPU_TYPE_ENTRY(P2020, P2020),
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index 89eea8c..4f7236f 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -186,6 +186,55 @@
 	mtspr	DBCR0,r0
 #endif
 
+#ifdef CONFIG_MPC8569
+#define CONFIG_SYS_LBC_ADDR (CONFIG_SYS_CCSRBAR_DEFAULT + 0x5000)
+#define CONFIG_SYS_LBCR_ADDR (CONFIG_SYS_LBC_ADDR + 0xd0)
+
+	/* MPC8569 Rev.0 silcon needs to set bit 13 of LBCR to allow elBC to
+	 * use address space which is more than 12bits, and it must be done in
+	 * the 4K boot page. So we set this bit here.
+	 */
+
+	/* create a temp mapping TLB0[0] for LBCR  */
+	lis     r6,FSL_BOOKE_MAS0(0, 0, 0)@h
+	ori     r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
+
+	lis     r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
+	ori     r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
+
+	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
+	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
+
+	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
+						(MAS3_SX|MAS3_SW|MAS3_SR))@h
+	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
+						(MAS3_SX|MAS3_SW|MAS3_SR))@l
+
+	mtspr   MAS0,r6
+	mtspr   MAS1,r7
+	mtspr   MAS2,r8
+	mtspr   MAS3,r9
+	isync
+	msync
+	tlbwe
+
+	/* Set LBCR register */
+	lis     r4,CONFIG_SYS_LBCR_ADDR@h
+	ori     r4,r4,CONFIG_SYS_LBCR_ADDR@l
+
+	lis     r5,CONFIG_SYS_LBC_LBCR@h
+	ori     r5,r5,CONFIG_SYS_LBC_LBCR@l
+	stw     r5,0(r4)
+	isync
+
+	/* invalidate this temp TLB */
+	lis	r4,CONFIG_SYS_LBC_ADDR@h
+	ori	r4,r4,CONFIG_SYS_LBC_ADDR@l
+	tlbivax	0,r4
+	isync
+
+#endif /* CONFIG_MPC8569 */
+
 	/* create a temp mapping in AS=1 to the 4M boot window */
 	lis     r6,FSL_BOOKE_MAS0(1, 15, 0)@h
 	ori     r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index 58340c1..be43a3e 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -35,7 +35,7 @@
     defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
 #define FSL_HW_NUM_LAWS 8
 #elif defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \
-      defined(CONFIG_MPC8568) || \
+      defined(CONFIG_MPC8568) || defined(CONFIG_MPC8569) || \
       defined(CONFIG_MPC8641) || defined(CONFIG_MPC8610)
 #define FSL_HW_NUM_LAWS 10
 #elif defined(CONFIG_MPC8536) || defined(CONFIG_MPC8572) || \
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 094fb9c..0810b8e 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1609,8 +1609,19 @@
 	char	res2[12];
 	uint	gpiocr;		/* 0xe0030 - GPIO control register */
 	char	res3[12];
+#if defined(CONFIG_MPC8569)
+	uint	plppar1;
+			/* 0xe0040 - Platform port pin assignment register 1 */
+	uint	plppar2;
+			/* 0xe0044 - Platform port pin assignment register 2 */
+	uint	plpdir1;
+			/* 0xe0048 - Platform port pin direction register 1 */
+	uint	plpdir2;
+			/* 0xe004c - Platform port pin direction register 2 */
+#else
 	uint	gpoutdr;	/* 0xe0040 - General-purpose output data register */
 	char	res4[12];
+#endif
 	uint	gpindr;		/* 0xe0050 - General-purpose input data register */
 	char	res5[12];
 	uint	pmuxcr;		/* 0xe0060 - Alternate function signal multiplex control */
@@ -1651,7 +1662,7 @@
 	uint	svr;		/* 0xe00a4 - System version register */
 	char	res10a[8];
 	uint	rstcr;		/* 0xe00b0 - Reset control register */
-#ifdef CONFIG_MPC8568
+#if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569)
 	char	res10b[76];
 	par_io_t qe_par_io[7];  /* 0xe0100 - 0xe01bf */
 	char	res10c[3136];
diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
index 39da377..66a4735 100644
--- a/include/asm-ppc/immap_qe.h
+++ b/include/asm-ppc/immap_qe.h
@@ -20,7 +20,9 @@
 typedef struct qe_iram {
 	u32 iadd;		/* I-RAM Address Register */
 	u32 idata;		/* I-RAM Data Register    */
-	u8 res0[0x78];
+	u8 res0[0x4];
+	u32 iready;
+	u8 res1[0x70];
 } __attribute__ ((packed)) qe_iram_t;
 
 /* QE Interrupt Controller
@@ -580,7 +582,7 @@
 	u8 res14[0x300];
 	u8 res15[0x3A00];
 	u8 res16[0x8000];	/* 0x108000 -  0x110000 */
-#if defined(CONFIG_MPC8568)
+#if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569)
 	u8 muram[0x10000];	/* 0x1_0000 -  0x2_0000 Multi-user RAM */
 	u8 res17[0x20000];	/* 0x2_0000 -  0x4_0000 */
 #else
@@ -592,7 +594,7 @@
 
 extern qe_map_t *qe_immr;
 
-#if defined(CONFIG_MPC8568)
+#if defined(CONFIG_MPC8568) || defined(CONFIG_MPC8569)
 #define QE_MURAM_SIZE		0x10000UL
 #elif defined(CONFIG_MPC8360)
 #define QE_MURAM_SIZE		0xc000UL
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 5b29de0..83e3581 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -955,6 +955,8 @@
 #define SVR_8567_E	0x807E00
 #define SVR_8568	0x807500
 #define SVR_8568_E	0x807D00
+#define SVR_8569	0x808000
+#define SVR_8569_E	0x808800
 #define SVR_8572	0x80E000
 #define SVR_8572_E	0x80E800
 #define SVR_P2020	0x80E200